Showing posts with label SR Flip-Flop. Show all posts
Showing posts with label SR Flip-Flop. Show all posts

April 15, 2024

Mastering Verilog: Implementing Flip-Flops.

In this blog post, we’ll delve into the implementation of Flip-Flops in Verilog. Flip-Flops are crucial elements in digital circuits, used for storing binary data and synchronizing signals. Understanding how to implement Flip-Flops is fundamental for sequential logic design.

Below are the Verilog codes for different types of Flip-Flops:

1] D Flip-Flop:

module D_FF(input wire clk, input wire reset, input wire d, output reg q);
always @(posedge clk or posedge reset)
begin
if (reset)
q <= 1'b0;
else
q <= d;
end
endmodule

2] JK Flip-Flop:

module JK_FF(input wire clk, input wire reset, input wire j, input wire k, output reg q);
reg q_next;

always @(posedge clk or posedge reset)
begin
if (reset)
q_next <= 1'b0;
else if (j && k)
q_next <= ~q;
else if (j)
q_next <= 1'b1;
else if (k)
q_next <= 1'b0;
end

assign q = q_next;
endmodule

3] SR Flip-Flop:

module SR_FF(input wire clk, input wire reset, input wire s, input wire r, output reg q);
reg q_next;

always @(posedge clk or posedge reset)
begin
if (reset)
q_next <= 1'b0;
else if (s && r)
q_next <= q;
else if (s)
q_next <= 1'b1;
else if (r)
q_next <= 1'b0;
end

assign q = q_next;
endmodule

4] T Flip-Flop:

module T_FF(input wire clk, input wire reset, input wire t, output reg q);
reg q_next;

always @(posedge clk or posedge reset)
begin
if (reset)
q_next <= 1'b0;
else if (t)
q_next <= ~q;
end

assign q = q_next;
endmodule

Explanation:

Each Flip-Flop module has inputs for clock (clk), reset (reset), and specific control signals (d, j, k, s, r, t) depending on the type of Flip-Flop.
The q output represents the stored or computed binary data.
These Flip-Flop modules are synchronized to the positive edge of the clock (posedge clk).

Usage:

Instantiate the desired Flip-Flop module in your Verilog design and connect the input and output wires as needed to implement sequential logic.

The provided Verilog codes for Flip-Flops showcase the implementation of D, JK, SR, and T Flip-Flops, essential for storing and manipulating binary data in digital circuits. Experiment with these codes, understand their behavior, and integrate them into your sequential logic designs.

Happy Coding!!

Explore Our Topics!

Check out the extensive list of topics we discuss:  Communication Protocols: -  USB   - RS232   -  Ethernet   -  AMBA Protocol: APB, AHB and...